Important Menu

Login

Presentations in the 2009 FENDT
Source:    Publish Time: 2012-01-28 22:58   1875 Views   Size:  16px  14px  12px
   The main technical presentations introduced in the Sixth Forum are listed below:   Presentatio

 

 

The main technical presentations introduced in the Sixth Forum are listed below:

 
Presentation Title
Presented by
Institute
Topic: High-tech Application of NDT for Special Equipment

【001】Inspection and Nondestructive Testing Based on Failure Mode

Prof. SHOU Binan,

China Special Equipment Inspection Institute

【002】Discussion on TOFD Standard and Its Key Technologies

Dr.ZHENG Hui

China Special Equipment Inspection Institute

Topic: New Technology & Application of NDT

【003】The State-of-the-art NDT&E in China

Prof. SHEN Gong-tian

China Special Equipment Inspection Institute

【004】Ultrasonic Automated Non-destructive Testing Techniques and Applications in Industries

Prof. LIU Song-ping

Beijing Aeronautical Manufacturing Technology Research Institute, China

Topic: Nondestructive Testing Education and Training

【005】The Development Trend and Trained Personal on NDT&E

Prof. Han Yan

Modern Technology Research Center of NDT&E of Shanxi, North University of China

【006】Discussion on Several Problems about NDT Personnel Training with International Standard

Prof. Tu Yaoyuan

Shanghai Non-destructive testing Information and Technology Limited Corporation, China

Topic: High-tech Application of NDT for Special Equipment

【007】The Advance of Technology for Unexcavated Inspection of Underground Pressure Pipeline

Mr. HE Ren-yang

China Special Equipment Inspection Institute

【008】Defects Inspection Technologies of Multilayer Wrapped High Pressure Vessels

Prof. CAO Huai-xiang

Shandong Special Equipment Inspection Institute, China

【009】Experimental Investigation on coupling focusing ultrasonic technique for Inspection of Polyethylene butt fusion joint

Mr. GUO Weican

Zhejiang Province Inspection Center of Special Equipment, China

【010】Atmospheric Storage Tank Inspection Technology

Dr. LI Guang-hai

China Special Equipment Inspection Institute

【011】Pulsed Eddy Current Inspection technology and its Application for Pressure Equipment

Dr. SHI Kun

China Special Equipment Inspection Institute

【012】The Cause Analysis and Application of Lamb Waves in Backside Crack of Stainless Steel Lining

Mr. WANG Chun-mao

Shandong Province Special Equipment Inspection Institute, China

Topic:Research of Theory and Basic Technical for Nondestructive Testing

【013】 Intelligent Systems for Nondestructive Evaluation

Prof. Ryszard Sikora

West Pomeranian University of Technology, Poland

【014】Detection of the Defective Element in a Linear Array Transducer through Ultrasonic Field Simulation and Measurement

Prof. Kang-Lyeol Ha
Pukyong National University, Korea

【015】Behaviors and Applications of Antisymmetric Flexural Modes Propagating along Wedge Tips

Prof. Che-Hua Yang

National Taipei University of Technology, Taiwan Province, China

【016】Determination of the mechanical properties of film and the residual stress in welded structures based on laser induced surface acoustic waves

Prof. SHEN Zhong-hua

School of Science, Nanjing University of Sci. & Tech., China

【017】Electromagnetic Nondestructive Testing of Composite Materials

Prof. Tomasz Chady

West Pomeranian University of Technology, Poland

【018】Ultrasonic Signal Processing Techniques for NDE of Layered Structures

Prof. Guang-Ming Zhang
Liverpool John Moores University, UK

Topic:NDT Applied Technology Research and Development-Ultrasonics

【019】Multiple-View Ultrasonic Imaging Techniques for Welds

Prof. LIU Song-ping

Beijing Aeronautical Manufacturing Technology Research Institute, China

【020】Applications and Simulation of NDT ultrasonic Phased Array Techniques

Mr. Philippe Benoist
CEA –LIST, CEN Saclay, 91191 Gif sur Yvette, France

【021】The Latest Trends of Ultrasonic Phased Array Technology for Weld Testing

Mr. LI Yan

NDT Subcommittee of Wuxi Boiler and Pressure Vessel Society, Wuxi 214026, China

【022】The Development of Acoustic Emission Testing Technologies in China

Mr. DAI Guang

Daqing Petroleum Institute, China

【023】New EMAT Instrumentation, Sensors and Applications

Mr. Borja Lopez

Innerspec Technologies, USA

Topic: Research of Theory and Basic Technical for Nondestructive Testing- Digital Radiography

【024】Investigation on Characteristic of Computer Radiography (CR) Applied in Welding Inspection

Prof. QIANG Tian-peng

Jiangsu Province Special Equipment Safety Supervision Inspection Institute, China

【025】Computer Radiography in Investment Castings Inspection

Prof. WU Guanhua

Key Laboratory of  Nondestructive Testing, Ministry of Education, Nanchang Hangkong University, China

【026】The Development of Industrial Computed Radiography Inspection Equipment

Dr. Keqin Ding

China Special Equipment Inspection and Research Institute

【027】The development of CR technology and its standardization

Mr. Bob Li

Shanghai Yinghua  Inspection Technology Co., Ltd., China

【028】The Extend Application of Micro & nano Focus CT Technology

Dr. Fanqin Kong,              Dr. Thomas Mayer

GE Inspection technology Greater China Application Center)

【029】International Advances in Digital Radiography for Welds of Pressure Equipment

Mr. LI Yan

Jiangsu Taihu Boiler Co.,Ltd., Wuxi 214187, China

Topic: Nuclear Power Equipment Nondestructive Testing

【030】Nondestructive Testing in the Process of Nuclear Island Main Equipment Manufacture in Nuclear Power Station

Prof. Xu Zunyan

Shanghai Nuclear Power Group, China

【031】Innovative NDT Phased Array Applications to Nuclear Power Plant Inspection

Mr. Manuel Borras, etc.
TECNATOM S.A., Spain

【032】Development Status of NDT Technology for PWR NPP In-service Inspection

Prof. LIU Jin-hong

CGNPC Inspection Technology Company(CITEC)

【033】Investigation into Ultrasonic Testing of Thick Walled Austenitic Welds 

Mr. B. Köhler, etc.
Fraunhofer IZFP-D, Germany

【034】State of the Art in NDT Mechanized Equipment-How to Improve the Quality and the Reliability of NPP In-service Inspections

Mr. Diego Molpeceres
TECNATOM S.A., Spain

【035】Review of Research on Ultrasonic Examination Technology of Safe-end Dissimilar Metal Weld of NPP

Mr. CHEN Huaidong

CGNPC Inspection Technology Company (CITEC)

Topic: NDT Applied Technology Research and Development

【036】Research on the flaw classification and identification of the PEC NDT technology

Prof. Wang Haitao

School of automation engineering, Nanjing University of Aeronautics and Astronomy, China

【037】Simulation and Application of Electromagnetic Non-destructive Inspection Technology

Dr. Keqin Ding

China Special Equipment Inspection Institute

【038】MsS Screening & Long-term Structural Health Monitoring: Update on Recent Development and Applications  

Dr. Hegeon Kwun

Southwest Research Institute, USA

【039】Multi-frequency & Remote Field Eddy Current Testing Technology Used to Electric Power System

Mr. Chen Jingui

Xiamen IDEA Electronic Technology Co., Ltd. China

【040】Application of SAFT Algorithm in TOFD testing

Mr. WANG Zi-cheng

Wuhan Zhongke Innovation Technology Co. Ltd., China

【041】Application of Multiple Channels TOFD Technique for the Heavy Thickness Weld Inspection

Mr. XU Zhi

Leepipe Inspection Technologies Limited

Topic: Nondestructive Testing Education and Training

【042】Evaluation and Improvement of Special Equipment Non-destructive Testing Personnel Training and Examination work

Prof. GU Yin-ru

Jiangsu Province Qualification and Examination Committee for Special Equipment NDT Personnel, China

【043】Non-destructive testing Training and Qualification

Mr. JASON SCOTT

SGS Global NDT Training and Examination Centre

【044】Examination on ASNT NDT Level Ⅲ in China

Mr. Chen Yubao

Guangdong Institute of Special Equipment Inspection, China

【045】Management System of Training and Evaluation for Special Equipment Nondestructive Testing Personnel

Mr. Kuishu Jiang

Shandong Province Qualification and Examination Committee for Special Equipment NDT Personnel, China

【046】ASTM International: Non-Destructive Testing Standards

Mr. LIU Fei

ASTM International China Office

【047】Building Advanced Management System of NDT Examination and Qualification

Mr. DENG Zhi-fu

Wuxi Qianyuan Intelligent Safety Technology Institute, China

Topic: NDT Applied Technology Research and Development

【048】Testing Integrity of Manual Phased Array Ultrasonic Inspection

Dr. Garri Pass
Dr. Vincent Shen

Sonotron NDT, Israel

Russell NDE Systems Inc., Canada

【049】Near-surface Material Characterization with High-Frequency Eddy Current

Conductivity Measurement

Mr. Susanne Hillmann

FHG IZFP Dreseden

【050】High Speed Automatic Ultrasonic Inspection of Girth Welds for Off-Shore and On-Shore Pipelines Combining Phased Array, TOFD and Conventional Pulse Echo Technologies

Dr. Garri Pass
Dr. Vincent Shen

Sonotron NDT, Israel

Russell NDE Systems Inc., Canada

【051】Mobile hollow axle testing system for high speed trains

Mr. Henry Scholz

Arxes Engineering

【052】Automated volume and surface testing of steel billets

Mr. Klaus Goczol

Arxes Engineering

 
 
 
 
 
Prev article:Paper Abstracts of 2009 FENDT
Next articleCall for papers