Important Menu

Login

Conference Agenda of the 2012 FENDT
Source:    Publish Time: 2012-05-07 08:18   3016 Views   Size:  16px  14px  12px
  Conference Agenda of 2012 Far East Forum on Nondestructive Evaluation/Testing: New Technology & App

 

 
Conference Agenda of
2012 Far East Forum on Nondestructive Evaluation/Testing:
 New Technology & Application
Opening Session
TIME
: 8:30-10:00 AM, MAY 23, 2012
LOCATION
: GRAND BALLROOM, FIRST FLOOR
Keynote Reports
Date: MAY 23           Location: GRAND BALLROOM, First Floor
Chair: Prof. LIN Shuqing

10:10-10:30
【001】National Natural Science Foundation of China -- the purpose, procedures and funding areas, Dr. Zhang Zhaotian, National Natural Science Foundation of China, China (Chinese)
 
10:30-11:30
【002】Ultrasonic Measurement Models– Fundamental Building Blocks for Quantitative Measurements, Prof. Lester W Schmerr Jr., Iowa State University, USA
 

 


 
Session Report
Topic:New Ultrasonic Technology (Chinese)
DateMAY 23         LocationRoom ANHUI, Third Floor.
Chair: Prof. Zheng Hui, and Prof. Zhang Ping

14:00-14:40
003ultrasonic testing techniques of Composite materials, BI Jian-haoLEEPIPE Inspection Technologies Inc.
 
14:40-15:10
004Research on beam focusing behavior and beam steering behavior of ultrasonic phased array system,Sun Zhongbo, Tianjin Chengxinda Metal-testing Technology Co. Ltd.
 
15:10-15:40
005New Developments in Fast and Recordable Surface Inspection Using Electromagnetic Acoustic Transducer (EMAT) Techniques,Huidong Gao, Innerspec Technolgoies Inc
 
15:40-15:55
Break
15:55-16:25
006NON-CONTACT ULTRASOUND TECHNIQUE AND THE APPLICATION,Bai Xiaobao,Jiang YunxiMatrix U/E Technologies Ltd.
 
16:25-16:55
007Application of stainless steel weld inspection with Phased array technology, Guo leiZheng Zhenshun, Fermat Inspection Technology Co., Ltd.
 
16:55-17:25
008Review of MsS Guided Wave Testing of Piping and New Advancements Luo zhileiBeijing constant Technology,Inc
 

TopicUltrasonic and Miscellaneous(Chinese)
DateMAY 23         LocationRoom FUJIAN, Third Floor
Chair: Prof. Chen Zhenmao, Prof. Gu Yinru

14:00-14:40
009System integration of phased array simulation dynamic real time imaging technology, Mr. Li Jianfeng, BLC NTD, China
 
14:40-15:10
010Review of automated ultrasonic testing technology and equipment of the primary circuit of EPR NPP, WANG-WEIQING MA-GUANBINGCGNPC Inspection Technology Corporation
 
15:10-15:40
011Ultrasonic Phased Array Technology for GIS Line Conductor Circumferential Weld Inspection, Ji Xuan-rong, Guangzhou Doppler Electronic Technologies Company
 
15:40-15:55
Break
15:55-16:25
012Internationally accreditation dynamic research on Non-destructive testing field, Niu Xingrong Liu Lidong Pan Feng, China National Accreditation Service for Conformity Assessment
 
16:25-16:55
013Research of “ Cloud ” Non-destructive Testing and Evaluation Technique, LIN Jun-Ming, (Eddysun (Xiamen) Electronic Co. Ltd.
 
16:55-17:25
098Phased array technology application in aeronautics and astronautics NDT industry, Wang Xiaoning, NDT Equipment Department,OLYMPUS (CHINA) CO., LTD
 

Topic:Ultrasonic Research(English)
DateMAY 23         LocationRoom BEIJING, Third Floor.
Chair: Prof. Lester W Schmerr Jr, and Prof. Younho Cho

14:00-14:30
015Nonlinear acoustic spectroscopy and thermography based on a local defect resonance, Igor Solodov Institute of Polymer Technology, Department of Nondestructive Testing, University of Stuttgart
 
14:30-15:00
016Nonlinear Ultrasonic NDE for Early Stage Damage Detection, Prof. Younho Cho, Pusan National University, Korea;
 
15:00-15:30
017Nondestructive Measurement Technology for composite Properties Parameters, Chunguang Xu, Beijing Institute of Technology
 
15:30-15:45
Break
15:45-16:15
018Non-contact air-coupled sensing of concrete structures, Jinying ZhuThe University of Texas at Austin
 
16:15-16:45
019 Coda wave interferometry methods for ultrasound characterization of concrete and cracked materials, Prof. Vincent TOURNAT, Université du Maine, France
 
16:45-17:15
020INDUSTRIAL LASER-ULTRASONIC RECEIVERS: RECENT PROGRESS IN MULTI-CHANNEL RANDOM-QUADRATURE INTERFEROMETERS, A. Wartelle1, B.Pouet1, S.Breugnot1 ,Bai Xiaobao2 ,Jiang Yunxi2, 1Bossa Nova Technologies,2 Matrix U/E Technologies Ltd.
 

Topic:Acoustic Emission(Chinses)
DateMAY 23         LocationRoom GUIZHOU, Third Floor.
Chair : Prof. Dai Guang and Prof. Li Huan

14:00-14:30
021High-temperature on-line acoustic emission monitoring of Hydrogenation reactor overlay cracks, Jiang Jun, Nanjing Boiler & Pressure Vessel Supervision and Inspection Institute
 
14:30-15:00
022Application of acoustic emission detection technology in atmospheric storage tank leak detection, Yan He, China Special Equipment Inspection and Research Institute
 
15:00-15:30
023Investion on characteristics of Acoustic Emission Signal for Pressure Vessel Metal Materials, Feng Shao, Nanjing Boiler & Pressure Vessel Supervision and Inspection Institute
 
15:30-15:45
Break
15:45-16:15
024The signal analysis for AE testing of the first boosting,ZHANG xiaobin, Guangxi Special Equipment Supervision and Inspection Institute
 
16:15-16:45
025Acoustic Emission Test of Pressure Vessel Leakage, Zhongzheng Zhang, Nanjing Boiler & Pressure Vessel Supervision and Inspection Reasearch Institute
 
16:45-17:15
026Research on Acoustic Emission Spherical Tank Detection, Rong Yi, Nanjing Boiler & Pressure Vessel Supervision and Inspection Institute
 

Topic:NDT Application (Chinese)
DateMAY 23         LocationRoom YUNNAN, Third Floor.
Chair : Prof. Guo Weican and Prof. Chen Yubao

14:00-14:30
032Experimental Research on the Ability to Penetrate Thick Plate of Portable High Frequency X-ray Machine——To Replace Ir192 With Portable High Frequency X-ray Machine, Huang Changhe, Tianjin Special Equipment Inspection Institute
 
14:30-15:00
028The Crane Structure Health Monitoring System Research based on Wireless strain sensing node, Dr. Ding Keqin, Wang Zhijie, China Special Equipment Inspection and Research Institute
 
15:00-15:30
029High pressure thick wall pipe hydrogen damage mechanism and inspection technology research,Prof. Yao Xiaojing, Shandong Special Equipment Inspection Institute;
 
15:30-15:45
Break
15:45-16:15
030The Research on Ultrasonic Testing for Electro-fusion joint of Reinforced Thermoplastic Pipes (RTP), Prof. Guo Weican, Zhejiang Provincial Special Equipment Inspection and Research Institute;
 
16:15-16:45
031Application of Creeping wave technology in Power Boiler’s TOFD testing, Yubao Chen, Guangdong Institute of Special Equipment Inspection
 
16:45-17:15
100Ultrasonic Feature Imaging Method for Scanning TY Tubular Joint In Special Equipment, Liu Weicheng, The Inspection & Research Institute of Boiler & Pressure Vessel of Jiangxi Province
 

Topic:Stress Meeasurment(Chinese)
DateMAY 23         LocationRoom JIANGSU, Third Floor.
Chair: Prof. Qiao song and Prof. Wang Zhengdao

14:00-14:30
033Structure Welding Residual Stress Electromagnetism Measuring Technology and Instrument Development, DING KeqinWANG HongzhuWANG ZhijieZHAO Na, China Special Equipment Inspection and Research Institute
 
14:30-15:00
034Advances and Evaluation of Metal Magnetic Memory NDT Technique,Zhengdao Wang, Kai Yao, Kai Shen, Ting Huang,Department of Mechanics, School of Civil Engineering, Beijing JiaoTong University
 
15:00-15:30
035Rail stress testing based on Barkhausen effect, Prof. Wang Ping, Nanjing University of Aeronautics and Astronautics, China
 
15:30-15:45
Break
15:45-16:15
036Large-scale sphere tank health monitoring system research and development, Prof. Qiao Song, China Special Equipment Inspection and Research Institute
 
16:15-16:45
037Electromagnetic Nondestructive Evaluation of Plastic Deformation in Steel Structures, Prof. Chen Zhenmao, Xi’an Jiaotong University, China
 
16:45-17:15
038Residual Stress Measurement by Ultrasonic Wave, Qinxue Pan Ph.D., Beijing Institute of Technology
 

TopicNew Technology Development(Chinese)
DateMAY 24         LocationANHUI, Third Floor
Chair: Prof. Wang Haitao and Prof. Lu Chao

8:30-9:00
039Research on Pulsed eddy current imaging technique for crack defect, BinFeng Yang,Institute of Telecommunication Engineering, Air Force Engineering University,Xi'an 710077)
 
9:00-9:30
040Magnetostrictive guided wave pipeline detection theory and experimental study, Prof. Tang Zhifeng, Zhejiang University, China
 
9:30-10:00
041Propagation mechanisms of longitudinal guided wave in anchorage bolt and anchorage quality NDT research, Prof. Wang Cheng, Beijing University of Technology, China.
 
10:00-10:15
Break
10:15-10:45
042The computer vision technology research on the high speed railway track surface defects measurement,Wang Haitao, Nanjing University of Aeronautics and Astronautics
 
10:45-11:15
043Rail Foot Defects Detection Based on Vertically Vibrating Mode Guided Waves, LU Chao,Key Laboratory of Nondestructive TestingMinistry of Education, Nanchang Hangkong University
 
11:15-11:45
044The research of phased array ultrasonic technology and the automatic NDT system in the railway wheel-set, Peng Jianping, Southwest Jiaotong University, China
 

Topic:New Radiography Technology(Chinese)
DateMAY 24         LocationRoom FUJIAN, Third Floor.
Chair : Prof. Wu Guanhua and Prof. Mao Xiaohu

8:30-9:00
045Development Trend of Digital Radiography Testing Technology Judging from the Standard of ISO 17636-2:2011, Wang Jun, Jiangsu Province Special Equipment Safety Supervision Inspection Institute
 
9:00-9:30
046Some Ideas on Version of JB/T4730.2 ,Zhu Chong-bing, CITEC, China and Prof. Qiang Tianpeng, Jiangsu Province Special Equipment Safety Supervision Inspection Institute
 
9:30-10:00
047Research on X-ray multi-spectrum imaging based on variable voltage,Ping Chen, Jinxiao Pan, Yan Han, North University of China, Taiyuan 030051, China
 
10:00-10:15
Break
10:15-10:45
048Micro and Nano CT with Metrology, Manager Zhang Likai, Dr. Kong Fanqin, GE Testing, China
 
10:45-11:15
049Digital X-Ray development and new application, Manager Kiesel Denis, Manager Liu Senyu, GE Testing China
 
11:15-11:45
050Micro and Nano CT in industry,Dr. Kong Fanqin, Manager Zhang Likai, GE Testing, China
 

Topic:Electromagnetic and Miscellaneous(English)
DateMAY 24         LocationBEIJING, Third Floor
Chair: Prof. Tian Guiyun, Prof. Liu Xiaozhou

8:30-9:00
051Fast crack profile reconstruction using pulsed eddy current signals, Libing Bai1, 2 Gui Yun Tian1, 21School of automation Engineering, University of Electronic Science and Technology of China
 
9:00-9:30
052Defect Characterization Using Frequency Components of Pulsed Eddy Current Signal, Zhiwei ZENG, Department of Aeronautics, Xiamen University
 
9:30-10:00
053Eddy Current Thermography as an Advanced Nondestructive Testing Technique for Defect Detection and Characterisation in Metallic Samples,I. Z. Abidin,1Malaysian Nuclear Agency, 43000 Bangi, Kajang Selangor, Malaysia
 
10:00-10:15
Break
10:15-10:45
054Advanced flux leakage systems for nondestructive evaluation, Prof. Tomasz Chady, Zachodniopomorski Uniwersytet Technologiczny
 
10:45-11:15
055Optical tomography: from human body to optoelectronics Optical tomography: from human body to optoelectronics, Prof. Claude Boccara, Laue-Langevin Institute, France
 
11:15-11:45
056Photoacoustic Investigation of the Silicon Membranes, Prof. Dragan M. Todorović , University of Belgrade, SERBIA;
 

TopicAcoustic Emission(Chinese)
DateMAY 24         LocationGUIZHOU, Third Floor
Chair : Prof. Jiang Jun and Prof. Zhang Xiaobing

8:30-9:00
057Application of Acoustic Emission Technology in Safety Valve Leakage Inspection, FANG Xue-feng Nanjing boiler & pressure vessel inspection institute
 
9:00-9:30
058Clustering of acoustic emission signals collected during tensile tests on hydrogenation reactor material, Yang Zhijun,  Acoustic Emission Inspection And Structural Integrity Assessment Laboratory, Northeast Petroleum University
 
9:30-10:00
059Study on Determination of the Elastic Modulus of Wood Based on Acoustic-Ultrasonic Technology, XU Feng College of Information Science and Technology, Nanjing Forestry University
 
10:00-10:15
Break
10:15-10:45
060Discussion on acoustic emission data acquisition and analysis software development, Ding Hui, Beijing Crahesion Science & Trade Co., Ltd;
 
10:45-11:15
061The latest application development of acoustic emission technology,Mr. Xu Fengjing, Physical Acoustics Corporation Beijing Office, China
 
11:15-11:45
062Fatigue Crack Damage of Acoustic Emission Testing For Steel Bridge Weld, WANG Wen You, Physical Aciystics Corp.Beijing Office, Beijing, China
 

TopicNew Technology of NDT(English)
Date:MAY 24      Location:Room YUNNAN, Third Floor
Chair: Prof. Chen Zhenmao and Prof. Zeng Zhiwei

8:30-9:00
063Creep strain measurements: applications and implementation of SPICA, Hulshof, Harrie , TESTARC- DNV KEMA
 
9:00-9:30
064High temperature wall thickness monitoring by KEMWAT, Overes, Rob, TESTARC- DNV KEMA
 
9:30-10:00
065External inspection of boiler evaporator tubes with KEMBUS, Overes, Rob, TESTARC- DNV KEMA
 
10:00-10:15
Break
10:15-10:45
066Corrosion monitoring at critical locations in boilers with KEMCOPS, Overes, RobTESTARC- DNV KEMA
 
10:45-11:15
067FLEXIBLE EDDY CURRENT ARRAY PROBE FOR WELD INSPECTIONS, Bruce A. Stetler1, Jiang Yunxi2, 1Eddyfi NDT, Inc.,2 Matrix U/E Technologies Ltd.
 
11:15-11:45
068NDT of metal structural and fatigue state as well as lifetime estimation based on metal magnetic characteristic measurement – coercivity (coercive force) metering, Gennadiy Bezlyudko, Roman SolomakhaSpecial Scientific EngineeringKharkov, Ukraine, Jack ZhaoBeijing Constant Technology, Inc.Beijing, China
 

 


TopicStress Meeasurment(Chinese)
Date:MAY 24      Location:Room JIANGSU, Third Floor
Chair: Prof. Liu zenghua and Prof. Liu Wenfeng

8:30-9:00
069The research progress of prestressed strand measurement based on longitudinal ultrasonic guided wave technique and its application prospect , Dr. Liu Zenghua, Beijing University of Technology, China
 
9:00-9:30
070Application of magnetic flux sensor in cable and anchor monitoring, Liu Wenfeng, Jiangxi Fashion Technology Co., Ltd, China;
 
9:30-10:00
071Stress testing technology based on optical fiber, Tang Li, China Academy of Engineering Physics, China;
 
10:00-10:15
Break
10:15-10:45
072The latest X-ray diffraction residual stress measurement technology and standard introduction, Zhao Lang, Shi Xinhua,
 
10:45-11:15
073Welding residual stress measurement by using X-ray diffraction methods, Mr. Lin Jinjun, EPCO, China
 
11:15-11:45
074Application of the metal magnetic memory method for detection of defects at the initial stage of their development for damage prevention of power engineering welded steel structures and steam turbine parts, S. Kolokolnikov - Energodiagnostika Co. Ltd.- (Russia)
 

 


TopicInstrument Development(Chinese)
Date:MAY 24      Location:Room ANHUI, Third Floor
Chair: Prof. Wang Haitao and Prof. Xu Chunguang

14:00-14:30
075Development of a Portable High-Precision Above Ground Marker System for an MFL Pipeline Inspector, Songling HUANG,State Key Laboratory of Power Systems, Department of Electrical Engineering, Tsinghua University
 
14:30-15:00
076New Methods of High Speed and Precision Electromagnetic Detection and Equipment, Kang Yihua, Huazhong University of Science and Technology
 
15:00-15:30
077Oil Well On-line Detection Methods and System, He Fuyun, Hefei University of Technology;
 
15:30-15:45
Break
15:45-16:15
078Magnetic Flux Leakage Scanning Testing Method Study with Variable Diameter Adapter Structure on Pipe Outer Wall and Its Application, DAI GuangNortheast Petroleum University
 
16:15-16:45
NewApplication of CR in industrial NDT;
Dr. Christopher Mitchell
 
16:45-17:15
080Network-based Handheld Video & Multi-frequency Eddy-Current Detection Terminal, Lin Junming1, Eddysun (Xiamen) Electronic Co. Ltd.
 

TopicElectromagnetic(Chinese)
DateMAY 24         LocationRoom FUJIAN, Third Floor
Chair : Prof. Guo Weican and Prof. Gu Yinru

14:00-14:30
081Electromagnetic Inspection Technique to detect Corrosion under Insulation, Yu Yuwu, Shen Jianping, Russell N.D.E. Systems Inc, Canada;
 
14:30-15:00
082About New Electromagnetic testing Technique In Pressure Equipment Inspection, YAO LiChina Air-dynamical Research and Development CenterMianyang Sichuan
 
15:00-15:30
083Discussion of the Magnetic Field Strength in Magnetic Particle Examination, XU Zun-Yan, ZENG Jia Shanghai Electric Nuclear Power Equipment Co Ltd
 
15:30-15:45
Break
15:45-16:15
084Special pipe ultrasonic and eddy current automatic inspection technology research, Wang Hailing, Inner Mongolia North Heavy Industries Group Corp. Ltd;
 
16:15-16:45
085QuantitativeNDE of Plastic Deformation Based on Barkhausen Noise and Incremental Permeability, Chen Hongen, Xi’an Jiaotong University
 
16:45-17:15
086Pulsed eddy current testing based on transient gradient magnetic field signals, Qi Yong, Xi’an Jiaotong University
 

TopicUltrasonic(English)
DateMAY 24         LocationRoom BEIJINGThird Floor.
Chair: Prof. Lester W Schmerr Jr.and Prof. Guangming-Zhang

14:00-14:30
087Laser Ultrasound Technique Applied for Material Characterization of Nuclear Fuel Claddings at Elevated Temperatures,Cheng-Hung Yeh and Che-Hua Yang, Graduate Institute of Mechanical and Electrical Engineering, National Taipei University of Technology, Taipei, Taiwan
 
14:30-15:00
088;
 
15:00-15:30
089A secondary calibration method for acoustic emission sensor sensitivity, ZHANG Zhaona,XIAO Dingguo,YANG Bo, PAN Qinxue, Key Laboratory of Fundamental Science for Advanced MachiningBeijing Institute of Technology
 
15:30-15:45
Break
15:45-16:15
090In-situ Observation and Acoustic Emission Analysis for Corrosion Pitting and SCC of MgCl2 Droplet in SUS304 Stainless Steel, Prof. SHIWA. Mitsuharu, Tokyo University, Japan
 
16:15-16:45
091Lifetime reliability monitoring of solder joints using ultrasound, Prof. Guangming-Zhang, Liverpool John Moores University, UK
 
16:45-17:15
092Quantitative Electro-mechanical Impedance Evaluation on the Mechanical Damage of Austenitic Stainless Steel under Tensile Stress, Zhongbing Luo, Li Lin*,NDT&E Laboratory, Dalian University of Technology, Dalian 116085, China
 

 


Topic:Acoustic Emission and Ultrasonic(Chinese)
Date:MAY 24      Location:Room GUIZHOU,Third Floor.
Chair: Prof. Jiang Jun and Prof. Wu guanhua

14:00-14:30
093The acoustic emission instrument hardware development history of Germany Vallen Company, Chen Moucai,Ding Hui, Duan Qing-ru, Zhu Qing, Beijing Crahesion Science & Trade Co., Ltd
 
14:30-15:00
094Research and development of portable acoustic emission instrument, Mr. Liu Shifeng, Beijing Soundwel Technology Co., Ltd;
 
15:00-15:30
095The Numerical Simulation of Electromagnetic Acoustic for ferromagnetic materials, Zhou Haiqiang, Xi’an Jiaotong University
 
15:30-15:45
Break
15:45-16:15
096Physical Modeling of Thermal Barrier Coatings and Numerical Simulation of Ultrasonic Testing, Zhiyuan MA, Li LIN*, NDT&E Laboratory, Dalian University of Technology, Dalian 116085, China
 
16:15-16:45
097Phased array and TOFD technology application in oil/gas and petrochemical NDT industry, Wang Xiaoning, NDT Equipment Department,OLYMPUS (CHINA) CO., LTD
 
16:45-17:15
NewDAC/TCG versus DGS sizing techniques in the light of the new trueDGSTM technology, Johann Klein; GE Inspection Technologies
 

Topic:NDT Applications(Chinese)
DateMAY 24         LocationRoom YUNNANThird Floor.
Chair: Prof. Wang Lixin and Prof. Mao Xiaohu

14:00-14:30
099Film digital in ray detection and defect database analysis technology research, Wang Lixin, Shandong Special Equipment Inspection Institute
 
14:30-15:00
027The research of key technology on integrity management of pressure pipeline and CPIM software, Dr. He Renyang, China Special Equipment Inspection and Research Institute
 
15:00-15:30
101Research for real-time Remote Controller of Industrial X-Ray Instrument, LI XufengGuangdong Province Special Equipment Inspection Institute
 
15:30-15:45
Break
15:45-16:15
102Austenitic stainless steel deformation martensite magnetic testing research, Sheng Shuiping, Hangzhou Special Equipment Inspection Institute
 
16:15-16:45
103Eddy current testing stainless steel storage tank, Peng GuoPing, Guangzhou Special Pressure Equipment Inspection & Research Institute
 
16:45-17:15
104Modal Test and Analysis Techniques of Ship-Unloader Boom, Baiqing LiuGuangzhou Academy of Special Equipment Inspection & Testing
 

 
 


Topic:Research and Application(Chinese)
DateMAY 24         LocationRoom JIANGSUThird Floor.
Chair: Prof. Liu Xiao and Prof. Tian Guiyun

14:00-14:30
105Simulation of multi-cracks in solid using harmonics filtering with a time reversal process, Xiaozhou Liu, Key Lab of Modern Acoustics, Institute of Acoustics, Nanjing University
 
14:30-15:00
106Towards automated non-destructive evaluation, Larissa Fradkin, London South Bank University, UK;
 
15:00-15:30
107Intelligence Algorithms in Nondestructive Evaluation, Ryszard Sikora, Zachodniopomorski Uniwersytet Technologiczny;
 
15:30-15:45
Break
15:45-16:15
108Ultrasonic measurement model for phased arrays inspection on side-drilled holes, Dr. Zhao Xinyu,School of Mechanical Engineering, Beijing Institute of Technology, China
 
16:15-16:45
109Based on Alternative current field measurement techniques cracks quantitative detection system design, SHI Hong-yuan1,CHEN Jin-gui2, Key Laboratory of Nondestructive Test (Ministry of Education) , NCHU, Nanchang 330063, China; 2.Xiamen IDEA Electronic Technology Co.,Ltd,Xiamen 361008,China)
 
16:45-17:15
110Development and application of Pulsed Eddy Current Testing on Imaging Technique, Chen Jingui(Xiamen IDEA Electronic Technology Co.,LTD. 361008)